Hydraulic Valves are of extreme importance in almost all hydraulic systems. In hydraulic applications, a valve can be considered a switch, allowing fluid to flow in a certain path necessary to power other devices in the system like hydraulic motors and actuators.
There’s only one name you need to know for hydraulic valve maintenance service or hydraulic control valve repair service: INDUSTRIAL EQ DIAGNOSTICS. We are proven experts in the maintenance and repair of hydraulic valves and pumps, along with motors and general industrial electronics.
With OEM and aftermarket hydraulic valve parts from all of the major brands, such as Bosch, Rexroth, Moog, Norgren, Parker, Fisher, and Abex, our trained and certified professionals will restore your hydraulic valve to service! We understand hydraulic valves and pumps like we do electronics and want to provide the same quality of service and care to our industrial hydraulic valve repair service as we do to the electronics repair service we are world-famous for.
At Industrial EQ Diagnostics, we know one thing for sure: downtime can be a killer. It’s impossible to stick around in this situation for long, as when hydraulic valves don’t do their job, it slows down your entire operation.
That’s the reason we have a system in place to service your hydraulic valves in five days or less — two days or less for rush orders. We’ll get it done right and fast, so you’re back in business with minimal loss of productivity.
We will completely disassemble your valve and clean and inspect it to find out what the issues are. Anything that’s likely to fail, we’re going to replace. Anything that’s not working and that we can repair, we will repair. We put your valve through a rigorous test regimen to ensure that you get a return valve you can trust. We then cement your confidence in that renewed valve with our 2-year In-Service Warranty.
So, if you have ever tried to wonder how exactly is hydraulic valve repair done, here are the steps we follow. We like to think we’re a bit more efficient than other hydraulic maintenance companies when it comes to hydraulic control valve repair, something we’re quite proud of. Here’s how it works:
1. Identify the valve type – In the case of your hydraulic valve problem, your valve comes to us for repair under the care of a master hydraulic valve mechanic with years or even decades of experience. The first thing we need to do when we receive your valve is figure out exactly what type of valve it is. Hydraulic valves are an extremely wide-ranging descriptor, and we could be talking about anything from a cam valve to a much more sophisticated servo valve. We’re qualified to work with any kind of hydraulic valve, but the type will factor into the method we use for the repair of your valve.
2. Disassemble the Valve – After determining what we are working with, we disassemble that valve. Our technicians examine the valve to identify any defects, wear, or other issues that could have caused the valve to fail. We examine every detail of the valve critically such that we cannot miss any potential issue, from a leaking O-ring to some sort of contaminants affecting the spool.
3. Verify all systems to isolate the cause of the issue – Once that’s done, it’s ready to go to electrical where we put it back together and start testing the systems electronically to locate the source of the problem. The elimination of the valve will depend on how complex the valve is but we spend as long as is necessary to remove and evaluate every element of the valve that could possibly be problematic. We turn every stone to find the problem behind your valve. If all looks OK, we will move on to replacing the soft seals, which is the next most likely source of the problem. We perform this process in a clean room or area to prevent contamination. You can rest assured that if there’s anything that moves or can be unbolted on the valve, we’ll pull it apart and check it for wear or damage. We will replace the seals and anything else that may need replacing to ensure that the valve meets OEM specifications. In fact, the spool, the actual heart of your hydraulic valve is most often completely fine, which is why we suggest trying hydraulic valve repair before simply replacing your valve. In most cases, it comes down to either some piece of the onboard electronics or a failed seal problem.
4. Re-assemble and final testing – After we find all problems, replace any worn components or seals, and adjust electronics, we re-assemble, then mount on our sophisticated testing equipment to ensure everything is functioning in accordance with OEM specifications.
While you wait, you can track online updates on the status of your repair, and if you want to know more, just reach out to us at any time, 24/7. On the other end of the line, an informed specialist waits to discuss your hydraulic valve repair.
If you’re worried about the cost of your hydraulic valve repair service, you can breathe a sigh of relief. We give you a number right away, what you can expect your repair to cost, and it’s a number you can trust. We also have the best price for the same repair in the market and guarantee to beat any competitor's price!
If your business is hydraulic-powered, you know you need an all-in-one shop that you can trust with all of your maintenance and repair work. Today, we’re prepared to be that for you. Contact us online to request a free quote for our hydraulic valve repair service. You can also reach us at 111-222-333 if you prefer.
